|
INSTRUCTIONS FOR NU-LITE
THIS PRODUCT IS INTENDED FOR THE
REMOVAL OF THE YELLOW DISCOLORATIONS FROM YOUR HEADLIGHTS
|
| Your kit includes: |
| (1) latex glove |
| (1) 2 oz. bottle o Nu-Lite step A solution |
| (1) glass vial of Nu-Lite Protective step B |
| (2) coarse sponges |
| (1) applicator for part B |
| (1) lint-free towel |
|

Buy it now
$13.95
DIRECTIONS FOR USE
- USE ONLY IN A
WELL-VENTILATED ARE
|
| - PLEASE READ ALL
INSTRUCTIONS BEFORE USE |
|
| 1.
Make certain that your headlights are clean before you
begin |
|
| 2.
Remove all of the contents of the Nu-Lite container
package |
|
| 3.
Take the 2. oz. bottle of step A solution and empty into
container |
|
| 4.
Take 2 oz. bottle with water & add the container |
|
| 5.
Take one piece of the coarse sponge and place it in this
solution, making sure that it is very wet . Rub it all over your headlight. CAUTION: MAKE SURE NOT TO RUB ON ANY
CHROME OR PAINTED SURFACES. You may have to wet it several times. Make sure you do the
entire surface of your headlight & marker
light if needed. It should only take up to 2 minutes to
complete each light. Use a new piece of
coarse
sponge on each headlight. |
| |
| 6.
Take the towel provided and make sure that it is
thoroughly wet with fresh water. Clean the lights and let dry. Make sure that even the corners of the lights are
also dry. |
| |
|
| 7.
Put on the disposable latex glove and empty some of the
Nu-Lite step B on the applicator, (use the gray side only) and apply to the lights. Do the entire
headlight, covering each area only once. Let dry. You
are
now done If your headlights have
internal water or moisture, this product will not be as
effective, but will show a significance difference in the
clarity and appearance. If using this product on a
Mercury Sable, it will not work on the center area, but
will clean & improve headlights. |
| |
|
DANGER
|
| - Keep out of reach of
children. May be harmful if swallowed. Do not breathe
vapor or fumes. Do not get in eyes, on skin, or clothing. |
| - Should you get Part B in
your eyes, flush eyes with fresh water for at least 15
minutes and seek medical attention. |
| - There could be potential
damage should Part B come in contact with the finish of
your vehicle. |